Caprice V8-265 4.3L VIN W MFI (1995)
REMOVE OR DISCONNECT
1. Loosen wing nuts at front of air cleaner housing.
2. Lift air cleaner lid, Mass Air Flow (MAF) sensor and resonator as a unit.
3. Remove air filter element.
INSTALL OR CONNECT
1. Install air filter element.
2. Move air cleaner lid, MAF sensor and resonator into place.
3. Tighten wing nuts.
4. Check clamps at MAF sensor and tighten if necessary.
5. Check joints between duct, resonators and throttle body for possible air leaks. Repair if necessary.
NOTICE: If the Mass Air Flow (MAF) sensor is installed backwards, the system will go rich. An arrow cast into the plastic portion of the sensor
indicates proper air flow direction. The arrow must point toward the engine.
