Caprice V8-265 4.3L VIN W MFI (1995)
Fuel Pressure Test Port: Service and Repair
Fuel Test Port Valve
CLEAN
^
Area around fuel pressure connection with GM X-3OA or equivalent.
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Relieve fuel system pressure.
^
Refer to Fuel Delivery System / Service and Repair.
3. Fuel pressure connection valve assembly.
INSTALL OR CONNECT
1. Fuel pressure connection valve assembly.
2. Tighten fuel filler cap.
3. Negative battery cable.
INSPECT
^
Turn ignition switch to the "ON" position for two seconds, then turn to the "OFF" position for ten seconds. Again turn to "ON" position, and check
for fuel leaks.
