Caprice V8-265 4.3L VIN W MFI (1995)
3. On all models, remove stabilizer to lower control arm attachment.
4. Disconnect tie rod end from steering knuckle.
5. Install a suitable coil spring compressor, then compress coil spring.
6. Remove lower control arm to frame bolts, then pivot lower control arm rearward.
7. Carefully loosen coil spring compressor and remove coil spring from vehicle.
8. Reverse procedure to install. Position coil spring as shown in Fig. 11. Install front pivot bolt first. To ensure adequate suspension clearance,
install front pivot bolt from front, with nut toward rear of vehicle. Rear bolt can be installed from either direction.
9. Tighten pivot bolts to specifications.