Caprice V8-265 4.3L VIN W SFI (1996)
C. Press trunk button within 1 second of step B.
^
The receiver will cycle through the lock, unlock, trunk sequence 3 times as verification.
6. To program a second transmitter to the receiver, repeat step 4 with the second transmitter. Otherwise, go to 7.
7. Disconnect the programming connector.
^
System will not operate if ground connection is not removed.
8. Verify operation of each transmitter.
9. Reposition rear compartment trim, for sedan.
10. Install left back body pillar finish panel, for wagon.
