Caprice V8-265 4.3L VIN W SFI (1996)
Oil Pan: Service and Repair
Fig. 14 Oil Pan & Gasket Assembly
1. Disconnect battery ground cable, then remove air cleaner, resonator and air intake duct.
2. Remove radiator upper fan shroud if equipped with a mechanical fan.
2. Disconnect windshield wiper motor electrical connector.
3. Raise and support vehicle, then drain engine oil.
4. Disconnect oil level sensor connector, then remove oil level sensor.
5. Remove warm up three-way catalytic converters from exhaust manifolds, then catalytic converter support-to-transmission bolts/screws and
