Caprice V8-265 4.3L VIN W SFI (1996)
6. Remove the fuel outlet tube (5) from the pressure regulator (1).
7. Remove the O-ring (3) from the fuel outlet tube (5).
-
Discard the O-ring.
INSTALLATION PROCEDURE
1. Lubricate the new O-ring (3) with clean engine oil.
2. Install the O-ring (3) on the fuel outlet tube (5).
3. Push the fuel outlet tube (5) into the pressure regulator (1).
4. Install the fuel outlet tube retainer clip (4).
5. Install the fuel tube bracket and the attaching screw.
Tighten
Screw to 5 Nm (44 lb. in).
6. Install the fuel rail assembly.
7. Tighten the fuel filler cap.
8. Connect the negative battery cable.
9. Inspect for leaks.
A. Turn the ignition switch ON for 2 seconds.
B. Turn the ignition switch OFF for 10 seconds.
C. Turn the ignition switch ON.
D. Check for fuel leaks.
