Caprice V8-265 4.3L VIN W SFI (1996)
Refrigerant Pressure Sensor / Switch: Locations
A/C Cycling Switch
RH Rear Engine Compartment, attached to A/C Accumulator
A/C High Pressure Switch
The high-pressure switch is located in the compressor discharge line which runs between the compressor and condenser. It is mounted on a Schrader
valve, therefore the system does not have to he discharged to remove the switch. (#8 in the illustration)
A/C Low Pressure Switch
The low-pressure switch is located on the low-side refrigerant line running along the engine compartment rear bulkhead, just above the evaporator case.
It is mounted on a Schrader valve, therefore, the system does not have to be discharged to remove the switch. (#13 in the illustration)