Caprice V8-265 4.3L VIN W SFI (1996)
11. Lubricate outer edge of end cover with power steering fluid and press end cover into housing.
12. Insert retaining ring into groove in housing, with ring opening near access hole opening.
13. Remove plug and any chips, then coat end of new return tube with Loctite solvent part No. 75559 and Loctite adhesive part No. 290, or
equivalents and press return tube into housing until bottomed.
P Series L/Reservoir Pump
Fig. 9 Power Steering Pump Assembly Overhaul (Part 1 Of 2)
