Caprice V8-307 5.0L (1987)
7.
If the Servo Bail hole has a burr, file off the burr so that the bail surface is flat on both sides.
8.
Obtain Bushing Kit (P/N 25111444). Install the Bushing onto the Bail as shown in Figure 3, so that the two tabs snap firmly in place. If the bail is
bent (or twisted) so that the new Bushing will not easily snap into place on the Bail (as shown in Figure 3), straighten the Bail as necessary.
9.
Install the Clip over the Bushing and Bail as shown in Figures 3 & 4.
Reinstall the Servo Rod Assembly through the new Bushing by positioning the "Z" pin as shown in View "A" of Figure
2.
Reinstall the spring retainer in the original (marked) hole in the rod, pointing the spring retainer in the direction shown in Figure 4.
If the Servo Rod Assembly is missing the "Z" pin, install a second Spring Retainer in the end hole normally occupied by the "Z" pin.
10.
Ensure that the throttle mechanism will return fully to the idle position.
11.
Reinstall the air cleaner assembly and reconnect hose and electrical connections as may be appropriate.
12.
Install a Campaign Identification label, remove fender cover from left fender, and close hood.
ID Label & Claim Information
CAMPAIGN IDENTIFICATION LABEL
Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label."
Each label provides a space to include the five (5) digit dealer code of the dealer performing the campaign service. This information may be inserted
with a typewriter or a ball point pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
periodic servicing by the owner.
Apply "Campaign Identification Label" only on a clean dry surface.
CLAIM INFORMATION
Submit a Product Campaign Claim with the information indicated below:
*
Campaign Administrative Allowance
** The "Parts Allowance" should be the sum total of the current GMSPO Dealer Net price plus 30% of all parts required for the repair.
Dealers will automatically receive the correct labor and material allowance based on the labor operation performed.
Refer to the Chevrolet Claims Processing Manual for details on Product Campaign Claim Submission.
Owner's Letter
Dear Chevrolet Owner:
