Caprice V8-350 5.7L (1985)
WS
485714
XY
485748
WT
485715
YH
482086
HH
10003182
YH
482086
If inspection determines vehicle has correct springs, lower vehicle and refer to Step 3. Should replacement be required complete Steps 2 and 3.
SERVICE PROCEDURE (CONT'D)
2.
Removal and installation procedure for replacing springs may be found in the 1985 Impala, Caprice, Monte Carlo, El Camino Shop Manual
(ST-329-85), on Pages 3C-12 and 3D-4.
3.
Install "Campaign Identification Label" according to instructions contained in this bulletin.
PARTS INFORMATION
Parts required to complete this modification are to be obtained from General Motors Warehousing and Distribution Division (GMWDD). To ensure that
these parts will be obtained as soon as possible they should be ordered from GMWDD on a C.I.O. order with no special instruction code, but on an
advise code (2). When ordering parts, refer to spring chart for correct spring application.
Claim Information
Submit a Product Campaign Claim with the information indicated below:
Parts
Failed
Parts
Failure
Labor
Labor
*Other
Count
Part No.
Allowance
Code
Operation
Hours
Hours
00
V2710
.2
.1
DESCRIPTION: Inspect for correct spring application. If correct, no further action required.
Parts
Failed
**Parts
Failure
Labor
Labor
*Other
Count
Part No.
Allowance
Code
Operation
Hours
Hours
4
378503
00
V2711
2.1
.1
DESCRIPTION: Inspect for correct spring application and replace all four springs per instructions in this bulletin.
*Campaign Administrative Allowance.
**The Parts Allowance should be the sum total of the current GMWDD Dealer Net plus 30% of all parts required for the repair.
Dealer will automatically receive the correct labor allowance based on the labor operation performed.
Refer to the Chevrolet Claims Processing Manual for details on Product Campaign Claims submission.
Campaign Identification Label
CAMPAIGN IDENTIFICATION LABEL
Each vehicle modified in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label."
Each label provides a space to include the five digit dealer code of the dealer performing the campaign service. This information may be inserted with a
typewriter or ballpoint pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
periodic servicing by the owner.
Apply "Campaign Identification Label" only on a clean dry surface.
