Caprice V8-350 5.7L DSL VIN N FI (1982)
FIGURE 4 - AIR CHECK OF HOUSING & SHAFT ASSEMBLY
1.
If you have an input clutch housing which does not have the new air bleed orifice cup plug (Figure 2) then, place your thumb firmly over the oil
hole on the turbine shaft shown in Figure 4.
FIGURE 7 - Bleed Orifice Cup Plug
FIGURE 8 - Turbine Shaft
2.
If you have an input clutch housing which has the new air bleed orifice cup plug (Figure 7) then, place your middle finger over the air bleed orifice
cup plug and your index finger over the oil hole on the turbine shaft as shown in Figure 8.