Caprice V8-350 5.7L DSL VIN N FI (1982)
Clutch Pedal Assembly: Adjustments
Fig. 1 Clutch linkage adjustment. 1982---83 Camaro
1982-83 EXCEPT CORVETTE
1.
Disconnect return spring at clutch fork.
2.
Rotate clutch lever and shaft assembly until pedal is against rubber bumper on dash brace.
3.
Push outer end of clutch fork rearward until throwout bearing lightly contacts pressure plate fingers.
4.
Install pushrod in gauge hole and increase length until all lash is removed, Fig. 1.
5.
Remove swivel or rod from gauge hole and insert into lower hole on lever. Install retainer and tighten locknut being careful not to change rod
length.
6.
Reinstall return spring and check pedal free travel, which should be 1/2 to 1 inch.