chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Alignment|Specifications > < Steering/Suspension - Wheel Alignment Specifications|Page 5545
Page 1
background image

Alignment: Technical Service Bulletins
Alignment - Reduced Front Vehicle Trim Height

Number:

92-140-3C

Section:

3C

Date:

MARCH 1992

Corporate Bulletin No.: 233302

ASE No.: A4

Subject:
REDUCED FRONT VEHICLE TRIM HEIGHT

Model and Year:
1991-92 CAPRICE (POLICE CARS)

Condition:
Some operators of 1991-92 B-car (Police Cars) (RPO 9C1) may experience a reduced front trim height condition.

Cause:
Installation of additional equipment on the front of the vehicle, such as buddy bars/push bars, may increase vehicle mass to a point where a reduction in
vehicle front trim height occurs.

Correction:
On vehicles that have been identified as not meeting front trim height specifications as shown in the applicable Service Manual Section 3 (Steering,
Suspension, Tires and Wheel Diagnosis), replace existing front coil springs with new springs, P/N 22076514. Service procedure for removal and
installation as indicated in applicable Service Manual Section 3C (Front Suspension) should be followed to ensure proper installation.

Parts are currently available from GMSPO.

Warranty Information:

Labor Operation Number: T1847

Labor Time: 2.0 Hrs.

Alignment|Specifications > < Steering/Suspension - Wheel Alignment Specifications|Page 5545