Caprice Classic V8-305 5.0L VIN E TBI (1991)
Band Apply Servo: Service and Repair
Hydra-Matic 200-4R
1.
Raise and support vehicle.
2.
Remove four catalytic converter heat shield screws, then position heat shield aside.
3.
Install servo cover depressor tool No. J-29714 or equivalent, using two oil pan screws.
4.
Depress servo cover, then remove retaining ring.
5.
Remove servo cover, then the O-ring. O-ring may be located in the case.
6.
Remove the servo assembly.
7.
Reverse procedure to install.
