Caprice Classic V8-305 5.0L VIN E TBI (1991)
Governor: Service and Repair
Turbo Hydra-Matic 4L60 (700-R4)
1. Raise and support vehicle
2. Proceed as follows:
a. Remove transmission mount to support nut.
b. Remove support to frame attaching bolts.
c. Using a transmission jack, support and raise transmission slightly.
d. Remove transmission support, then lower transmission to gain access to governor cover.
3. Remove governor cover from case using extreme care not to damage cover. If cover is damaged, it should be replaced.
4. Remove governor.
5. Reverse procedure to install and check fluid level.
