Caprice RWD V8-305 5.0L (1992)
1. Coat a new engine cover gasket (100) with gasket sealant.
2. Install gasket (100) into position on the engine front cover (57).
3. Position the engine front cover (57) and assembled gasket (100) over the crankshaft end.
4. Loosely install the engine front cover-to-block upper attaching bolts (99).
NOTICE: Do not force the engine front cover over the dowels to the point where the cover flange or the dowels become distorted.
5. Tighten bolts (99) alternately and evenly while pressing downward on the engine front cover (57) so the dowels in the block are aligned with the
corresponding holes in the engine front cover (57).
6. Remaining cover bolts (99).
7. Tighten all cover bolts (99) alternately and evenly to 11 Nm (97 lb.in).
8. Oil pan, refer to See: Engine Lubrication/Oil Pan/Service and Repair
9. Torsional damper, refer to See: Service and Repair
10. Coolant pump, refer to See: Water Pump/Service and Repair