Caprice RWD V8-305 5.0L (1992)
Condition:
Tail lamp molding loose.
Cause:
Light corrosion of the retaining clips allows the molding to come loose.
Correction:
Install new molding assembly P/N 16520255. See illustration.
1.
Pry molding assembly rearward at the outboard end and remove.
2.
Install new molding assembly.
Part Availability:
Parts are expected to be available on April 27, 1992. In case of limited inventory, parts will be placed on 400 control to waive VIP surcharges. Only
verifiable emergency VIP orders will be accepted. SPO will make every effort to obtain parts. However, the part will be shipped premium transportation
at dealer's expense and all other order types will be placed on backorder until the 400 control is removed.
