chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Keyless Entry Module|Locations > < Brakes - ABS Light ON, Code 25, 35|Page 45
Page 1
background image

Keyless Entry Module: Technical Service Bulletins
Keyless Entry - Receiver Module Information

Number:

92-25-10

Section:

10

Date:

OCT. 1991

Corporate Bulletin No.: 138117

ASE No.: B1

Subject:

KEYLESS ENTRY INFORMATION

Model and Year:

1992 CAPRICE

Some 1992 B Cars built early in the year were built with a keyless entry (option AU0) receiver module which was not properly wired. The module is
located under the rear package shelf, between the rear speakers. All cars built with this condition had the option removed from the invoice before
shipment from the assembly plant, and were shipped without the transmitter.

If a transmitter from Parts is used in an attempt to use the keyless entry feature, the trunk release function will not work. NO ATTEMPT SHOULD BE
MADE TO CORRECT THESE VEHICLES.

The receiver module MUST be left in the vehicle for the normal power door locks to work properly. DO NOT REMOVE THE RECEIVER.

Vehicles after the following VIN's are built properly:

Willow Run:

NW103483 (NW100922 and NW101562 are also correct)

Arlington:

NR101011

Keyless Entry Module|Locations > < Brakes - ABS Light ON, Code 25, 35|Page 45