chevrolet Workshop Repair Guides

Chevrolet Caprice RWD V8-305 50L Workshop Service and Repair Manuals

Campaign - Tie Rod Clamp Loose|Page 5496 > < Campaign - Tie Rod Clamp Loose|Page 5490
Page 1
background image

Technical Service Bulletin # 92C22

Date: 920801

Campaign - Tie Rod Clamp Loose

Number: 92C22

Section: 3B

Date: Aug., 1992

Subject:
PRODUCT CAMPAIGN 92C22 - TIE ROD CLAMP BOLTS LOOSE

Model and Year:
1991-92 CHEVROLET CAPRICE (ARLINGTON ONLY)

To Select Chevrolet Dealers:

General Motors has determined that certain 1991-92 Chevrolet Caprice model vehicles built at the Arlington Assembly Plant may have been shipped
without having the four (4) tie rod adjusting sleeve clamp bolts/nuts tightened.  This condition could result in uneven tire wear.

To correct this condition, dealers are to inspect tie rod nut torques on involved vehicles and those vehicles with tie rod nuts torqued below specification
will have the tie rod assemblies replaced.

VEHICLES INVOLVED

Involved are the 1991-92 Chevrolet Caprice model vehicles built at the Arlington Assembly Plant.

Involved vehicles have been identified by Vehicle Identification Number Computer Listings.  Computer listings contain the complete Vehicle
Identification Number, owner name and address data, and are furnished to involved dealers with the campaign bulletin. Owner name and address data
furnished will enable dealers to follow-up with owners involved in this campaign.

These listings may contain owner names and addresses obtained from State Motor Vehicle Registration Records.  The use of such motor vehicle
registration data for any other purpose is a violation of law in several states.  Accordingly, you are urged to limit the use of this listing to the follow-up
necessary to complete this campaign.

Campaign - Tie Rod Clamp Loose|Page 5496 > < Campaign - Tie Rod Clamp Loose|Page 5490