Caprice RWD V8-305 5.0L (1992)
Adjust the front edge of the front door inboard of the front fender. Flush to 1.5 mm inboard. (See Figure 3).
NOTE:
In rare instances it may be necessary to adjust the front fender outboard to obtain a proper fit.
VI. Front edge of the rear door may be outboard slightly of the front door.
Adjust the front edge of the rear door inboard of the front door. Flush to 1.5 mm inboard (See Figure 3).
Door Assembly Align:
Labor Operation:
B4000 Right Front
B4001 Left Front
B4400 Right Rear
B4401 Left Rear
Use applicable labor time guide for labor hours.
Windnoise At the Front and Rear Door Window
VII. Windrush due to front door window belt molding gap to front door window reveal molding. Gap between the two moldings can be seen right behind
the mirror.
1.
Loosen the front and rear screws of the front door belt reveal molding (See Figure 4).