Caprice Wagon V8-307 5.0L (1987)
Exploded View Of Composite Master Cylinder
1. Clean all parts in clean denatured alcohol. Dry with compressed air.
2. Lubricate new reservoir grommets with brake fluid, then press grommets into master cylinder body. Ensure grommets are properly seated.
Installing Reservoir
3. Lay reservoir upside down on flat, hard surface. Press master cylinder body onto reservoir using rocking motion.
4. Lubricate new seals with brake fluid and install on secondary piston.
5. Install spring, spring retainer and secondary piston assembly into cylinder.
6. Lubricate seals then install primary piston. Depress primary piston into cylinder, then install lock ring.
7. Fit diaphragm into reservoir cover, then install cover onto reservoir.
8. Install master cylinder in vehicle.
