Caprice Wagon V8-350 5.7L (1994)
Glove Compartment: Technical Service Bulletins
I/P Compartment Door Latch/Lock Cylinder - Revised R&R
File In Section: 8 - Chassis/Body Electrical
Bulletin No.: 63-83-05
Date: March, 1996
SERVICE MANUAL UPDATE
Subject:
Section 8C - Revised Remove/Install Procedure for I/P Compartment Door Latch and Lock Cylinder Assembly
Models:
1994-96 Buick Roadmaster
1994-96 Cadillac Fleetwood
1994-96 Chevrolet Caprice, Impala
This bulletin is being issued to revise the remove/install procedure for the I/P compartment door latch and lock cylinder assembly in Section 8C of the
Service Manual.
Instrument Panel compartment Door Latch and Lock Cylinder Assembly
Figure 1 (Numbers indicated in parenthesis below refer to callout in Figure 1.)
Remove or Disconnect
1.
Open instrument panel (I/P) compartment door (6).
2.
Bolts/screws (8) from door latch assembly.
3.
Latch assembly from compartment door (6).
4.
Place latch in lock position.
5.
Lock cylinder assembly (5) from door latch assembly.
a.
Turn lock cylinder assembly (5) to lock position and remove key.
