Caprice Wagon V8-350 5.7L (1994)
Camshaft: Service and Repair
Fig. 10 Camshaft Removal
1. Remove intake manifold as described under "Intake Manifold Service and Repair."
2. Remove oil pump drive and driveshaft.
3. Remove valve covers, rocker arms and push rods. Keep rocker arms and push rods in order so they can be installed in same locations.
4. Remove accessory drive belt(s), then remove upper fan shroud.
5. Remove radiator.
6. On models equipped with A/C, discharge refrigerant system and remove condenser.
7. On all models remove timing chain as described under "Timing Chain, Service and Repair.
8. Remove grille.
9. Remove valve lifters. Keep valve lifters in order so they can be installed in same locations.
10. Install three 5/16-18 x 4 inch bolts in camshaft bolt holes, then carefully remove camshaft, Fig.10.
11. Reverse procedure to install.
