Caprice Wagon V8-350 5.7L (1994)
Oil Change Reminder Lamp: Service and Repair
Engine Oil Life Monitor
Engine Oil Life Monitor
The "CHANGE OIL" monitor light on the instrument cluster is a reminder to change oil. When changing oil, reset the oil life monitor whether the
"CHANGE OIL" light came on or not.
Reset monitor as follows:
1.
Remove instrument panel fuse block cover (this cover can be seen when the driver's door is open).
2.
Turn ignition "ON" but do not start engine.
3.
Press "OIL RESET" button and hold for 5 seconds.
^ When "CHANGE OIL" light goes out, oil life monitor is reset.
^ If it does not reset, turn ignition "OFF" and repeat procedure.
^ If "CHANGE OIL" light is inoperative or remains "ON," refer to POWERTRAIN MANAGEMENT section.