Caprice Wagon V8-350 5.7L (1994)
1. Install new gasket and cover assembly
2. Tighten cover screws
Torque Value: 3.2 N-m (28 lb.in.)
3. If installing a new IAC valve, measure distance between pintle and mounting surface. If greater than 28mm, use finger pressure to slowly
retract the pintle.
Install or Connect:
1. Install and tighten IAC valve attaching screws
Torque Value:
3 N-m (27 lb.in.)
2. Install throttle body to intake manifold
3. Reset IAC valve pintle position. Refer to ADJUSTMENT PROCEDURES.