Caprice Wagon V8-350 5.7L (1994)
Throttle Position Sensor: Service and Repair
Throttle Position Sensor (TPS)
REMOVE OR DISCONNECT:
1.
TP sensor electrical connector
2.
Remove two TP sensor attaching screws and retainers
3.
TP sensor
INSTALL OR CONNECT:
1.
With the throttle valve in the normally closed idle position, install throttle position sensor on throttle body assembly, making sure TP sensor
pickup lever lines up with tang on throttle actuator lever.
2.
Two TPS screws and tighten to 2.0 N-m (18.0 in lbs).
