Caprice Wagon V8-350 5.7L (1994)
Vehicle Speed Sensor: Description and Operation
Circuit Operation
The Speed Sensor Circuit consists of a magnetic type sensor and wiring. Gear teeth pressed on the Transmission Output Shaft induce an alternating
current in the sensor. This sensor generates a sine wave output with a frequency proportional to vehicle speed. The Powertrain Control Module (PCM)
converts this signal to an output that is switched to ground at a frequency of 4000 pulses per mile at the DK GRN/WHT wire (CKT 817), which feeds
the Warning Alarm, Power Steering Control Module, Instrument Cluster and Cruise Control Module.