chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Air Bag Disarming and Arming|Page 6979 > < Vacuum Solenoid Valve HVAC|Locations|Page 6972
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair
Air Bag Disarming and Arming

Disabling the SIR System

REMOVE OR DISCONNECT

^

Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.

^

Turn the ignition switch to "LOCK" and remove key.

1. "AIR BAG" fuse from I/P fuse block.
2. Connector Position Assurance (CPA) and yellow 2-way connector for both connectors located near the base of the steering column.

IMPORTANT:

^

With the "AIR BAG" fuse removed and ignition switch "ON," the "AIR BAG" warning lamp will be "ON." This is normal operation and does
not indicate a SIR system malfunction.

Enabling the SIR System

IMPORTANT:

^

With the "AIR BAG" fuse removed and ignition switch "ON," the "AIR BAG" warning lamp will be "ON." This is normal operation and does
not indicate a SIR system malfunction.

INSTALL OR CONNECT

^

Turn ignition switch to "LOCK" and remove key.

1. Both yellow 2-way connectors located near the base of the steering column and the corresponding CPA.
2. "AIR BAG" fuse to I/P fuse block.

Air Bag Disarming and Arming|Page 6979 > < Vacuum Solenoid Valve HVAC|Locations|Page 6972