Caprice Wagon V8-350 5.7L (1994)
16.
Separate the two banana plugs on the SIR Deployment Harness that were shorted together in Step 3. Refer to Figure 6.
NOTICE:
When air bag deploys, the rapid gas expansion will create a substantial noise. Notify all people in the immediate area that you intend to deploy the
inflator module.
CAUTION:
Deployment harness shall remain shorted and not be connected to a power source until the air bag is to be deployed. The inflator module will
immediately deploy the air bag when a power source is connected to it. Connecting the deployment harness to the power source should always be the
last step in the inflator module deployment procedure. Failure to follow procedures in the order listed may result in personal injury.
