Caprice Wagon V8-350 5.7L (1994)
10.
Position steering gear to frame rail and hand start attaching bolts. Torque attaching bolts in sequence # 1, # 2 and # 3 to 95 N.m (70 lb ft) as shown
in illustration.
11.
Connect flexible coupling to steering gear, install bolt and torque to 31 N.m (23 lb ft).
Notice:
Ensure that vehicle wheels are pointing straight ahead prior to connecting flexible coupling.
12.
Install wheel and tire assembly and torque wheel nuts to 135 N.m (100 lb ft).
13.
Lower vehicle.
14.
Slide coupling shield forward and secure in position.
15.
Install ABS module bracket nut and torque to 60 N.m (44 lb ft).
16.
Install and connect air cleaner snorkle.
17.
Start vehicle and cycle the steering lock to lock several times.
18.
Loosen but do not remove attaching bolts # 1 and # 2, start vehicle and cycle the steering lock to lock several times.
19.
Torque attaching bolt # 2 and then # 1 to 95 N.m (70 lb ft).
Parts Information
Parts are currently available from GMSPO.
Warranty Information
Labor Operation
Labor Time
(A) E7001
(A) 0.3 hr