chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Window Regulator > < Rear Door Window/Handle - Revised Service Procedure|Page 9176
Page 3
background image

Tighten

Tighten door locking system module screws to 10 N.m (89 lb in.).

Adjust

Adjust door outside handle rod by holding rod in the full up position and rotating barrel nut until the barrel nut aligns with the lever on the door
lock.

5.

Door outside handle rod to locking system module.

6.

Water deflector into place.

7.

Armrest support and rivets.

8.

Rear side door trim. Refer to "Rear Side Door Trim".

Window Regulator > < Rear Door Window/Handle - Revised Service Procedure|Page 9176