Caprice Wagon RWD V6-262 4.3L (1992)
7.
Torque wiper arm attachment to 23 N-m (17 lb.ft.).
PROCEDURE FOR COWL/HINGE PILLAR SEAM
(no illustration)
1.
Position vehicle on hoist.
2.
Open and raise hood to full open position and disconnect battery.
3.
Disconnect all component attachments to the inner fender liner on the affected side of the vehicle.
4.
Raise vehicle on hoist, and remove wheel and tire on the affected side of the vehicle.
5.
Remove front fender wheelhouse liner to gain access to the front body hinge pillar seams.
6.
Apply Body Seam Sealer to the seams.
7.
Reinstall the wheelhouse liner.
8.
Lower the vehicle and reinstall the components attached to the liner.
9.
Reconnect the battery, lower the hood and remove vehicle from hoist.
Labor Operations and Time Allowances.
MATERIALS REQUIRED: FOR DOOR WEATHERSTRIP SEALING
Use sealer such as 3M P/N's 08302 or 08405, * Dominion/American Sure Seal P/N LSC, Kent P/N 10500 or equivalent.
IMPORTANT:
DO NOT USE BLACK type sealers that remain soft, or "uncured" for sealing door opening weatherstrips to flanges.
