Cavalier L4-144 2.4L DOHC VIN T SFI (1997)
Transmission Position Switch/Sensor: Service and Repair
4T40-E Automatic Transmission
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Shift linkage.
3. Electrical connector.
4. Mounting bolts.
5. Switch assembly.
Replacement - Using Old Switch
INSTALL OR CONNECT
1. Place shift shaft in "Neutral."
2. Align flats of shift shaft with switch.
3. Mounting bolts, loosely.
4. Insert tool J 41545 and rotate switch until tool drops into position.
Tighten
-
Bolts to 24 N.m (18 lb ft).
REMOVE OR DISCONNECT