chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Drive Chain, A/T > < A/T - Revised Final Drive Pinion End Play Check|Page 6542
Page 1
background image

Automatic Transmission Dipstick - Dipstick Tube: Service and Repair

REMOVE OR DISCONNECT

1. Oil level indicator and nut or bolt retaining tube to mounting bracket.
2. Raise and support the vehicle.
3. Place drain pan under transaxle.
4. Loosen filler tube from transaxle.
5. Filler tube seal.
6. Lower vehicle.
7. Pull tube out of vehicle from the top.

INSTALL OR CONNECT

1. Filler tube.
2. Raise and support the vehicle.
3. Filler tube seal into transaxle.

-

Lubricate with DEXRON III.

4. Filler tube into transaxle.
5. Lower vehicle.
6. Fastener retaining tube to mounting bracket, refer to the image.
7. Oil level indicator.

Adjust

-

Oil level. Refer to "Transaxle Oil Level Checking Procedure."

Drive Chain, A/T > < A/T - Revised Final Drive Pinion End Play Check|Page 6542