Cavalier L4-2.2L VIN 4 (1998)
1. Install the bezel to the front door upper trim finish panel.
2. Install the remote control mirror bezel to the front door upper trim finish panel.
3. Connect the power mirror switch to the front door upper trim finish panel. (Power window only).
4. Install the front door upper trim finish panel to the remote control power mirror bezel. (Power window only).
NOTE: Refer to Fastener Notice in Cautions and Notices.
5. Install the screw to the front door upper trim finish panel.
Tighten
Tighten the screw to 1 Nm (12 lb in).
Convertible
