Cavalier L4-2.2L VIN 4 (1998)
5. Install the proportioner valve piston springs (1) in the master cylinder body.
6. Connect the new proportioner valve cap O-rings (1) in the grooves in the proportioner valve caps.
NOTICE: Always use the correct fastener in the proper location. When you replace a fastener, use ONLY the exact part number for that
application. The manufacturer will call out those fasteners that require a replacement after removal. The manufacturer will also call out the
fasteners that require thread lockers or thread sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or
other corrosion inhibitors) on threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and joint
clamping force, and may damage the fastener. When you install fasteners, use the correct tightening sequence and specifications. Following these
instructions can help you avoid damage to parts and systems.
7. Install the proportioner valve caps (1) in the master cylinder body.
^
Tighten the proportioner valve caps to 27 Nm (20 ft. lbs.).
8. Install the master cylinder reservoir if removed. Refer to Master Cylinder Reservoir Replacement.
