Cavalier L4-2.2L VIN 4 (1998)
Parking Brake Cable: Service and Repair
Park Brake Cable Replacement (Front)
REMOVAL PROCEDURE
1. Raise and support the vehicle. Refer to Vehicle Lifting and Jacking.
2. Pull and hold the cable towards the rear of the car in order to create slack in the cable.
3. Bend the tang (2) on the connector (1) in order to allow cable removal.
4. Disconnect the cable (3) from the connector (1).
5. Fold over the retaining clip.
6. Disconnect the cable (3) from the equalizer.
7. Lower the vehicle.
8. Remove the console. If you are repairing a Pontiac, also remove the shifter boot.
