Cavalier L4-2.2L VIN 4 (1998)
Idler Pulley: Service and Repair
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Remove the drive belt.
3. Remove the idler pulley bolts.
4. Remove the idler pulley.
INSTALLATION PROCEDURE
1. Install the idler pulley.
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the idler pulley bolts.
^
Tighten the bolts to 50 Nm (37 ft. lbs.).
3. Install the drive belt.
4. Connect the negative battery cable.