Cavalier L4-2.2L VIN 4 (1998)
Blower Motor Switch: Service and Repair
Remove or Disconnect
1. Negative battery cable.
2. Instrument Panel trim plate. Refer to Trim Plate in instrument Panel, Gauges and Console.
3. Control assembly screws and pull control assembly away from the instrument Panel.
4. Blower switch knob.
5. Electrical connection.
6. Blower switch retaining screws and blower switch.
Install or Connect
1. Blower switch and retaining screws.
Tighten
^
Screws fully driven, seated and not stripped.
2. Electrical connection.
3. Blower switch knob.
4. Control assembly and retaining screws.
Tighten
^
Screws to 2 N.m (18 lb in).
5. Instrument Panel trim plate.
6. Negative battery cable.
Tighten
^
Bolt to 16 N.m (12 lb ft).
