chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Deployment Procedures|Page 9019 > < Deployment Procedures|Page 9017
Page 3
background image

3. Connect the inflatable restraint IP module yellow 2-way pigtail connector to the SIR wiring harness jumper.

4. Install the Connector Position Assurance (CPA) to the inflatable restraint IP module yellow 2-way pigtail connector.
5. Install the IP trim pad. 
6. Enable the SIR system. 

Important Preliminary Precautions

CAUTION:  When you are carrying an undeployed inflator module:

^

Do not carry the inflator module by the wires or connector on the inflator module

^

Make sure the bag opening points away from you

When you are storing an undeployed inflator module, make sure the bag opening points away from the surface on which the inflator module
rests. When you are storing a steering column, do not rest the column with the bag opening facing down and the column vertical. Provide free
space for the air bag to expand in case of an accidental deployment. Otherwise, personal injury may result.

Deployment Procedures|Page 9019 > < Deployment Procedures|Page 9017