Cavalier L4-2.2L VIN 4 (1998)
Seat Belt Retractor: Service and Repair
Rear Seat Retractor Side Belt Replacement
Removal Procedure
Description
1. Remove the rear seat cushion and the rear seat back cushion. Refer to Seats and Carpet.
2. (Coupe Only) Remove the quarter trim finish panel extension. Refer to Rear Quarters.
3. (Sedan Only) Remove the quarter upper trim finish panel. Refer to Rear Quarters.
4. Remove the quarter trim finish panel. Refer to Rear Quarters.
5. (Sedan Only) Remove the center pillar upper trim panel. Refer to Roof.
6. (Sedan Only) Remove the carpet retainer. Refer to Seats and Carpet.
7. Remove the rear window panel trim. Refer to Body Rear End.
8. Remove the rear seat anchor plate bolt.
9. Remove the rear seat belt retractor bolt (1).
10. Remove the rear seat outer retractor side belt.
Installation Procedure
Description
IMPORTANT: Remove any twists in the seat belt webbing before final assembly.
1. Install the rear seat outer retractor side belt.
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the rear seat belt retractor bolt (1).
