Cavalier L4-2.2L VIN 4 (1998)
Fuel Pressure Sensor/Switch: Service and Repair
Fuel Tank Pressure Sensor
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Relieve the system fuel pressure.
3. Drain fuel tank.
4. Remove the fuel tank.
5. Remove the electrical connector from the fuel tank pressure sensor.
6. Remove the fuel tank pressure sensor (1) from modular fuel sender.
INSTALLATION PROCEDURE
1. Install the new fuel tank pressure sensor (1) to modular fuel sender.
2. Install the electrical connector to fuel tank pressure sensor.
3. Install the fuel tank.
4. Refill tank.
5. Install the negative battery cable.
