chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Suspension (Front) - Torque Specification Update|Page 8439 > < Front Suspension|Page 8434
Page 1
background image

Cross-Member: Technical Service Bulletins
Suspension (Front) - Torque Specification Update

File In Section: 03 - Suspension 

Bulletin No.: 02-03-08-006

Date: May, 2002

SERVICE MANUAL UPDATE

Subject: 
Revised Front Suspension Fastener Tightening Specifications

Models: 
1997-2002 Chevrolet Cavalier
1997-2002 Pontiac Sunfire

This bulletin is being issued to revise the fastener tightening specifications in the Lower Control Arm Replacement Procedure and the Fastener
Tightening Specifications in the Front Suspension sub-section of the Service Manual. Please replace the current information in the Service Manual with
the following information.

The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin
on the affected page.

The following tightening specification has been revised:

Control Arm to Crossmember Bolts (Front Bushing) - 100 N.m plus 90 degrees rotation (74 lb ft).

DISCLAIMER

Suspension (Front) - Torque Specification Update|Page 8439 > < Front Suspension|Page 8434