Cavalier L4-2.2L VIN 4 (1998)
Suspension Strut / Shock Absorber: Service and Repair
Front Suspension
Strut and Knuckle Scribing
SCRIBING PROCEDURE
1. Scribe the knuckle along the lower outboard strut radius (shown by the dotted line). Use a sharp tool.
2. Scribe the strut flange on the inboard side along the curve of the knuckle (shown by the dotted line).
3. Make a scribe mark across the strut/knuckle interface.
4. Match the marks to the components during reassembly.