Cavalier L4-2.2L VIN 4 (1998)
1. Install the 2nd clutch pressure switch, if applicable.
^
Tighten to 12 Nm (124 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install 3rd clutch pressure switch.
^
Tighten to 12 Nm (124 inch lbs.).
3. Install the torque converter clutch solenoid bolt to the control valve body.
4. Install the 0-ring.
^
Tighten to 12 Nm (124 inch lbs.).
5. Connect the wire leads to the pressure switch.
6. Connect the solenoid wire harness to the case electrical connector.
7. Install the transmission mount bracket.
8. Install the valve body cover with a new gasket. Refer to Valve Body Cover Replacement.
9. Inspect the oil level.
