Cavalier L4-2.2L VIN 4 (1998)
11. If the flow is insufficient, inspect the transmission for cause. Inspect the cooler pipes and fittings. Repeat the cooler flushing procedure. Replace
the cooler if the flow is still insufficient.
12. Remove the discharge hose.
13. Reconnect the cooler return pipe to the transmission.
14. Refill the unit to the proper fluid level.
A/T Fluid/Filter Changing (Install)
REMOVAL PROCEDURE
1. Remove the oil level indicator.
2. Remove the nut or bolt that retains the fill tube to the mounting bracket.
3. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
4. Place a drain pan under the transmission.
