Cavalier L4-2.2L VIN 4 (1998)
5. Lightly tap the oil pan with a rubber mallet or pry in order to allow the oil to drain.
6. Inspect the oil color. Refer to Transmission Fluid Checking Procedure (Diagnosis).
7. Remove the remaining oil pan bolts.
8. Remove the oil pan.
9. Remove the oil pan gasket.
10. Remove the oil filter.
11. Remove the oil filter O-ring seal.
12. Inspect the O-ring seal. The O-ring seal may be stuck in the case.
13. Remove all traces of old gasket material. Clean the transmission case and the oil pan gasket surfaces with solvent, and allow to air dry.
INSTALLATION PROCEDURE
^
Tools Required
-
J 36850 TRANSJEL(R) Transmission Assembly Lubricant
NOTICE: Use TRANSJEL(R) J 36850 or equivalent during assembly in order to retain checkballs or to lubricate components. Greases other than the
recommended assembly lube will change the transmission fluid characteristics and will cause undesirable shift conditions or filter clogging.
