Cavalier L4-2.2L VIN 4 (1998)
1. Install the J 41239-1 on the transmission case using cooler line bracket bolt.
2. Install a new seal in the case bore.
3. Press the new seals in. Tighten the cooler line bracket bolt until the seal bottoms out in the case bore.
4. Install the transmission oil cooler lines. Refer to A/T Oil Cooler Pipes Replacement.
5. Lower the vehicle.
6. Inspect the fluid level.
A/T Oil Cooler Pipes Replacement
REMOVAL PROCEDURE
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the transmission oil cooler lines from the radiator.
