Cavalier L4-2.2L VIN 4 (1998)
Transmission Mount: Service and Repair
3T40 Automatic Transaxle
A/T Mount Replacement (Front)
REMOVAL PROCEDURE
^
Tools Required
-
J 28467-360 Engine Support Fixture
1. Disconnect the negative battery cable.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
2. Install the J 28467-360 to the transmission. Raise the transmission enough in order to unload the transmission mounts.
3. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
4. Remove the left front wheel and tire assembly. Refer to Wheel Removal in Tires and Wheels.
5. Remove the left splash shield.
6. Remove the pipe expansion bolt from the transmission support assembly.
7. Remove the transmission mount to body bolts.
8. Lower the engine/transmission assembly just enough to be able to remove the transmission mount from the bracket.
