Cavalier L4-2.2L VIN 4 (1998)
^
Tighten the bolts to 66 Nm (49 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the transmission mount expansion plug.
4. Install the left front splash shield.
5. Install the left front tire and the wheel assembly. Refer to Wheel Installation in Tires and Wheels.
6. Lower the vehicle.
7. Install the upper transmission mount bolts.
^
Tighten the bolts to 66 Nm (49 ft. lbs.).
8. Remove the engine support fixture.
9. Connect the negative battery cable.
A/T Mount Replacement (Rear)
REMOVAL PROCEDURE
^
Tools Required
-
J 28467-360 Engine Support Fixture
